Results 1 to 2 of 2
  1. #1
    Hoff's love child Chapter: North Texas
    OG Scikotics
    Atomsk's Avatar
    Join Date
    Jun 2009
    Location
    Earth
    Posts
    8,998

    Default clutch pedal engagement point fix

    Here is a way to move the clutch pedal off of the firewall. You start first by disconnecting the slave cylinder from the transmission. After that you take the boot off with the push rod.
    101_0332.JPG101_0333.JPG101_0334.JPG

    After that you you need to get a piece of all thread or find a bolt that has the same diameter as the push rod, measure about 3/8 of a inch longer cut it and use a grinder to round out the edges

    101_0335.JPG101_0336.JPG


  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Hoff's love child Chapter: North Texas
    OG Scikotics
    Atomsk's Avatar
    Join Date
    Jun 2009
    Location
    Earth
    Posts
    8,998

    Default Re: clutch pedal engagement point fix

    101_0337.JPG

    Now with the edges ground down you can slide the boot back over it and put it back into the slave cylinder as well and bolt it back to the car, you will be able to feel a difference immediately. I would suggest doing this after you adjust the pedal height.thanks again 1nastytc for the help


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •